Competent Design Engineering work is essential in determining the needs to be met and the right hardware to be used in the efficient operation and maintenance of HVAC systems. If this important step is omitted, engineering, maintenance, operation, and management people will face long years of complaints and problems, as well as, high costs in the Operation and Maintenance of the Air-Conditioning and HVAC systems. In addition, a high electricity bill is sure to arrive. This HVAC design course is a solution to prevent all these problems.
The course is ready for IN-HOUSE TRAINING.
COURSE DESCRIPTION: This 2-day course provides
a comprehensive design study and workshop of the commercial and industrial air
conditioning (HVAC) systems. This design course will give participants
practical knowledge and understanding of the efficient design, operation, and
safe maintenance of refrigeration and air-conditioning equipment (HVAC systems)
found in industrial and commercial establishments. Topics covered include: properties
of air and water vapor, bodily reactions to air conditioning conditions,
factors affecting heat transfer in buildings, methods of determining heat loss
and heat gain, etc. Methods of determining duct sizes are given. Various cooling
and refrigeration systems are explained.
OBJECTIVES: After this course, the participants will be able to design HVAC systems in the most efficient and cost-effective manner. The course will be conducted in a step-by-step practicum and hands-on of the lessons.
WHY THIS COURSE? Competent design engineering work is essential in determining the needs to be met and the right hardware to be used in the efficient operation and maintenance of HVAC systems. If this important step is omitted, engineering, maintenance, operation, and management people will face long years of complaints and problems. In addition, a high electricity bill is sure to arrive.
THIS COURSE IS ALSO A BIG STEP TO SOLVE THE ENERGY AND CLIMATE CHANGE/GLOBAL WARMING CRISES!
According to several studies, Air-Conditioning or the HVAC systems are major sources of Greenhouse Gas emissions, as they consume huge amounts of electricity and heat energy. With lots of Air-Conditioning/HVAC systems in Hotels, Commercial and Industrial Buildings, Factories, Offices, Homes, Vehicles, etc., they are major causes of Climate Change/Global Warming and Energy crises. The proper and efficient design of HVAC systems is, therefore, a major solution to the terrifying Climate Change/Global Warming disasters.
Seminar Fee: P 20,000
Schedule: July 1 -- 2, 2014
Seminar Venue: Blk 17, Lot 3, Riverview Place, Pulangi St., GMA, Cavite, 4117 Philippines.
Contact: Engr. LOPE COLUMNA.
Mobile: +63 (926) 809-3337.
E-mail: Lope.Columna@yahoo.com
OTHER SCHEDULED COURSES: ALL THE COURSES ARE AVAILABLE FOR IN-HOUSE TRAINING (AT YOUR SITE).
OBJECTIVES: After this course, the participants will be able to design HVAC systems in the most efficient and cost-effective manner. The course will be conducted in a step-by-step practicum and hands-on of the lessons.
WHY THIS COURSE? Competent design engineering work is essential in determining the needs to be met and the right hardware to be used in the efficient operation and maintenance of HVAC systems. If this important step is omitted, engineering, maintenance, operation, and management people will face long years of complaints and problems. In addition, a high electricity bill is sure to arrive.
THIS COURSE IS ALSO A BIG STEP TO SOLVE THE ENERGY AND CLIMATE CHANGE/GLOBAL WARMING CRISES!
According to several studies, Air-Conditioning or the HVAC systems are major sources of Greenhouse Gas emissions, as they consume huge amounts of electricity and heat energy. With lots of Air-Conditioning/HVAC systems in Hotels, Commercial and Industrial Buildings, Factories, Offices, Homes, Vehicles, etc., they are major causes of Climate Change/Global Warming and Energy crises. The proper and efficient design of HVAC systems is, therefore, a major solution to the terrifying Climate Change/Global Warming disasters.
Seminar Fee: P 20,000
Schedule: July 1 -- 2, 2014
Seminar Venue: Blk 17, Lot 3, Riverview Place, Pulangi St., GMA, Cavite, 4117 Philippines.
Contact: Engr. LOPE COLUMNA.
Mobile: +63 (926) 809-3337.
E-mail: Lope.Columna@yahoo.com
OTHER SCHEDULED COURSES: ALL THE COURSES ARE AVAILABLE FOR IN-HOUSE TRAINING (AT YOUR SITE).
DESIGN, OPERATION,
MAINTENANCE, ENERGY EFFICIENCY, AND SAFETY COURSES
|
SCHEDULE
|
FEE
|
1.
AIR-CONDITIONING (HVAC) EFFICIENT DESIGN-WORKSHOP
|
July
1- 2
|
P20,000
|
2. WAREHOUSE
MANAGEMENT & MATERIALS HANDLING
|
July
3 - 4
|
P12,000
|
3. FORKLIFT
OPERATION & SAFETY COMPETENCY COURSE
|
July
8 - 9
|
P12,000
|
4.
ELECTRICAL PREVENTIVE MAINTENANCE AND SAFETY
|
July
10 - 11
|
P15,000
|
5.
SUBSTATION/POWER TRANSFORMERS EFFICIENT
OPER/MAINT.
|
July
15 - 16
|
P20,000
|
6.
WASTEWATER TREATMENT PLANT OPERATION & MAINTENANCE
|
July
17 - 18
|
P12,000
|
7. WASTEWATER TREATMENT PLANT
EFFICIENT DESIGN WORKSHOP
|
July
19 - 20
|
P20,000
|
8. computerized
MAINTENANCE MANAGEMENT SOFTWARE (CMMS)
Seminar-Workshop
|
July
24
|
P10,000
|
9. WORKPLACE SAFETY AND HEALTH
|
July
25
|
P
8,000
|
10. STEAM-BOILER
PLANT AND COMBUSTION SAFETY
|
July
29
|
P10,000
|
11. STEAM-BOILER
INSPECTION AND MAINTENANCE COURSE
|
July
30 - 31
|
P15,000
|
12. STEAM-PLANT ECONOMY AND PRACTICAL SAVINGS
|
Aug.
5 - 6
|
P20,000
|
13. FUELS
MANAGEMENT AND COMBUSTION EFFICIENCY
|
Aug.
7 - 8
|
P20,000
|
14. MAINTENANCE EXCELLENCE
SEMINAR-WORKSHOP
(A NEW PARADIGM OF MAINTENANCE MANAGEMENT)
|
Aug.
12 - 14
|
P28,000
|
15. POWER
HARMONICS MITIGATION AND MANAGEMENT
|
Aug.
15
|
P12,000
|
16.
COMPRESSED-AIR SYSTEMS EFFICIENT
OPERATION & MAINT.
|
Aug.
19 - 20
|
P12,000
|
17.
HUMAN ERROR PREVENTION AND MANAGEMENT
|
Aug.
21 - 22
|
P15,000
|
18.
ENERGY SYSTEMS
EFFICIENCY IMPROVEMENTS COURSE
(BEST PRACTICES IN ENERGY MANAGEMENT)
|
Aug.
26 - 27
|
P25,000
|
19.
DIESEL POWER PLANT EFFICIENT OPERATION/MAINTENANCE
|
Aug.
28 - 29
|
P15,000
|
20. ROPES/CHAINS/CABLES
SAFE USE, INSPECTION, & MAINTENANCE
|
||
21. SCAFFOLDING
AND LADDERS
ERECTION AND SAFETY
|
||
22. BASIC STRUCTURAL VIBRATION ANALYSIS AND CONTROL
|
||
23. ROTATING EQUIPMENT VIBRATION ANALYSIS AND CONTROL
|
||
24. CHILLED-WATER
SYSTEMS DESIGN SEMINAR-WORKSHOP
|
||
25. PUMPS &
PUMPING SYSTEMS DESIGN,
OPERATION/MAINTENANCE
|
||
26. ENERGY AUDITING COURSE (For
Hotels, Buildings, and Factories)
|
P25,000
|
|
27. PREVENTIVE
MAINTENANCE MANAGEMENT COURSE
|
P15,000
|
|
28. STEAM-BOILER
EFFICIENT OPERATION AND TROUBLESHOOTING
|
P12,000
|
|
29.
AIR-CONDITIONING (HVAC) EFFICIENT OPERATION/MAINTENANCE
|
P12,000
|
|
30. BEARINGS, SHAFTS, AND SEALS COURSE (Selection, Installation,
Performance, and Maintenance)
|
P12,000
|
|
31. EFFICIENT MAINTENANCE
MANAGEMENT OF BUILDINGS
|
||
32. BASIC
PLUMBING TRAINING COURSE
|
||
33. LIGHTINGS
DESIGN AND LED RETROFIT SEMINAR-WORKSHOP
|
||
34. TRIBOLOGY AND LUBRICATION BEST PRACTICES & MANAGEMENT
|
||
35. AC MOTOR
OPERATION & MAINTENANCE
|
||
36. ADVANCED AC MOTOR MAINTENANCE MGT. (WITH SOFTWARE)
|
||
37. HOUSEKEEPING
AND 5S WORKPLACE ORGANIZATION WORKSHOP
|
||
38. STEAM-TURBINE
FAMILIARIZATION AND BASIC OPERATION
|
||
39. STEAM-TURBINE MANAGEMENT AND
GOVERNING
|
||
40. THERMAL
POWER PLANTS Operation and Maintenance
|
||
41.
INDUSTRIAL WASTE HEAT RECOVERY
|
||
42. STEAM
TRAPS: SELECTION, MAINTENANCE & TROUBLESHOOTING
|
||
43. ROOT-CAUSE
FAILURE ANALYSIS (RCFA) SEMINAR-WORKSHOP
|
||
44. VALVES
& ACTUATORS SELECTION, INSTALLATION, AND MAINT.
|
||
45. BELT POWER
SELECTION, TRANSMISSION, INSPECTION, AND
MAINTENANCE
|
||
46. GEAR-TRAINS
APPLICATIONS AND MAINTENANCE
|
||
47. FUNDAMENTALS OF INDUSTRIAL
VENTILATION
|
||
48. QUALITY
CONTROL OF MANUFACTURED PRODUCTS
|
||
49. REPORT WRITING SEMINAR-WORKSHOP
|
||
50. ADVANCED
VEHICLE MAINTENANCE/TROUBLESHOOTING
COURSE
|
